Thermal Transfer Ribbons Versus Direct Thermal Transfer
It is very hard to find a monopolized product or service in the world today if there is no regulation from the government to protect a certain product. There is an option for almost every product. The same applies to thermal printing. There are two main kinds of thermal printing which are thermal transfer ribbons and direct thermal transfer. As their names suggest, one uses ribbons to imprint information while other does not need the ribbon.
Current print head life and its cost. In direct current transmission as the name hints, the print material is to be in direct contact with the label material as it is pulled across the printing head. On the other hand, thermal transmissions are designed with a back-coating to reduce the friction. Less friction and static means less wear and tear.
With the direct current transmission, it is not the same. The dust and debris that may be present in the labels are in direct contact with the print head. In the process of being pulled across the print head, they may burn or physically damage the elements. In the long run, you will have printed out poor quality or premature print head failure.
The printer configuration. There are printers that can do both direct and current transmissions. You can have such and choose which one you prefer. However, there are the printers specifically made for the direct current transmission. These are more affordable as they do not have all the hardware needed to support transmission ribbons. This also saves on time as you do not have to constantly change ribbons.
Once you buy something, you do not plan on constantly replacing it or repair it. So you should know what product is most durable. Some people go for any coated direct thermal printer because they believe that as long as it is coated it if the best quality. They forget even the poor quality types can be coated just for the market.
All these labels have various specifications. Each model of the different printers is different. They have different speeds and use different amounts of heat. The best thing is to avoid a lot of heat and go for maximum speed. A lot of heat may cause damage to the readability of the material. A bar code on a product may be undetectable therefore buying the product is harder.
Imagine buying a product that does not have instructions or precautions. You may end up running into accidents. All manufacturers should make sure that their products have clear instructions. They also need to choose the method of printing out the information. For long lasting content, current transmission is best. If you are sure that your product may not sell immediately, make sure that the writings are going to last long enough.
There has been a lot of waste in the environment which has led to its depletion. As you settle for a method, make sure you have considered the environment. The thermal ribbon uses chemical bases which may cause harm to the environment. The direct method, however, is safer because it does not use the ribbon.
Current print head life and its cost. In direct current transmission as the name hints, the print material is to be in direct contact with the label material as it is pulled across the printing head. On the other hand, thermal transmissions are designed with a back-coating to reduce the friction. Less friction and static means less wear and tear.
With the direct current transmission, it is not the same. The dust and debris that may be present in the labels are in direct contact with the print head. In the process of being pulled across the print head, they may burn or physically damage the elements. In the long run, you will have printed out poor quality or premature print head failure.
The printer configuration. There are printers that can do both direct and current transmissions. You can have such and choose which one you prefer. However, there are the printers specifically made for the direct current transmission. These are more affordable as they do not have all the hardware needed to support transmission ribbons. This also saves on time as you do not have to constantly change ribbons.
Once you buy something, you do not plan on constantly replacing it or repair it. So you should know what product is most durable. Some people go for any coated direct thermal printer because they believe that as long as it is coated it if the best quality. They forget even the poor quality types can be coated just for the market.
All these labels have various specifications. Each model of the different printers is different. They have different speeds and use different amounts of heat. The best thing is to avoid a lot of heat and go for maximum speed. A lot of heat may cause damage to the readability of the material. A bar code on a product may be undetectable therefore buying the product is harder.
Imagine buying a product that does not have instructions or precautions. You may end up running into accidents. All manufacturers should make sure that their products have clear instructions. They also need to choose the method of printing out the information. For long lasting content, current transmission is best. If you are sure that your product may not sell immediately, make sure that the writings are going to last long enough.
There has been a lot of waste in the environment which has led to its depletion. As you settle for a method, make sure you have considered the environment. The thermal ribbon uses chemical bases which may cause harm to the environment. The direct method, however, is safer because it does not use the ribbon.
About the Author:
You can get excellent tips on how to choose a supplier of thermal transfer ribbons and more information about a reputable supplier at http://www.vantageid.com/product-category/label-ribbon-supplies/thermal-transfer-ribbons right now.
0 comments:
Post a Comment